Activation Steps for your non-AT&T Android device

  • Access the Settings menu.
  • Locate Wireless & Networks, More Networks, or Connections.
  • Select Mobile Networks > Access Point Names.
  • Select the option to add a new APN. Usually accessed by a + symbol on the screen or by tapping the menu button.
  • Program each field using the exact settings below.
  • Make sure to save the changes on the top right corner and then return to the APN's menu and select the new APN.

Values to Enter:

Data settings Smartphones
Name phone
APN phone
Proxy Not set
Port Not set
Username Not set
Password Not set
Server Not set
MMS proxy
MMS port 80
MCC 310
MNC 410
Authentication Type None
APN type default,mms,supl,hipri
APN protocol IPv4/IPv6
APN roaming protocol IPv4/IPv6
Bearer LTE (preferred)
  • Once all added, please save using the three buttons top right corner!
  • After saved, and APN is selected, please power the phone off and back on to confirm that when it comes back up data is working!
  • If not yet kicked in once restarted, please check this setting:
    Under Mobile Networks, change Network Mode to 'search for networks' then select ATT.
  • It will come up with AT&T under Network Operators
Was this article helpful?
0 out of 0 found this helpful